Home / Filters

Replacement Filters

The JVP line of pumps benefit from a regular replacement of their filters. On a general note, the filter should be changed at least every 6 months, however, it could be sooner depending the environmental conditions of your industry.

While blowing out the filters on a regular basis is an excellent idea, and will help keep your pump filters clean, the high pressure air can cause deformation, cuts, and breaks in the filter paper. Also, blowing the filters out will also cause the particles to actually embed themselves in the porosity of the filter paper, further clogging them, and causing your pump to run harder. The cleaner the filter, and the passage of air through it, will allow the pump to breathe, run cooler, and give longer life to the pump.

JVP-3/5

Vacuum Side

Pressure Side

Part# JVP-1001-00027-A Part# JVP-1001-00026-A
Size OD ID W Size OD ID W
1 3/4" 3/4" 3 1/2" 1 3/4" 3/4" 3 1/2"
45mm 20mm 88mm 45mm 20mm 88mm
Fits: JVP-3/5 Fits: JVP-3/5
JVP-3DP/5DP JVP-3DP/5DP
KRX-1/3/5 KRX-1/3/5
KRS-1/3/5 KRS-1/3/5
KRF-15/25/15A/25A KRF-15/25/15A/25A
KD-400/401/750/751 KD-400/401/750/751
CBF1515/2525 CBF1515/2525
CBS15/25 CBS15/25
CBX15/25 CBX15/25
Other part #'s: 04000028010 Other part #'s: 04010303010
Manufactured in the USA. Manufactured in the USA.

JVP-6

Vacuum Side

Pressure Side

Part# JVP-6-00027-A Part# JVP-6-00026-A
Size OD ID W Size OD ID W
1 3/4" 3/4" 5" 1 3/4" 3/4" 5"
45mm 20mm 124mm 45mm 20mm 124mm
Fits: JVP-6 Fits: JVP-6
JVP-6DP JVP-6DP
KRX-6 KRX-6
KRS-6 KRS-6
KRF-40/40A KRF-40/40A
KD-1500/1501 KD-1500/1501
CBF4040 CBF4040
CBS40 CBS40
CBX40 CBX40
Other part #'s: 04009779010 Other part #'s: n/a
Manufactured in the USA. Manufactured in the USA.

JVP-7/8/10

Vacuum Side

Pressure Side

Part# JVP-1002-00027-A Part# JVP-1002-00026-A
Size OD ID W Size OD ID W
2.56" 1.18" 4.53" 2.56" 1.18" 4.53"
65mm 30mm 115mm 65mm 30mm 115mm
Fits: JVP-7/8/10 Fits: JVP-7/8/10
JVP-7DP/8DP/10DP JVP-7DP/8DP/10DP
KRX-7A KRX-7A
KRS-7A/7D KRS-7A/7D
KRF-70/110 KRF-70/110
KRA-8/9/10 KRA-8/9/10
KRH-8 KRH-8
CBS-61 CBS-61
CBX-62 CBX-62
Other part #'s: 04000451010 Other part #'s: n/a
Manufactured in the USA. Manufactured in the USA.

JVP-400/750

Vacuum Side

Part# JVP-400-00011-A
Size OD ID W
1.57" 0.43" 1.89"
40mm 11mm 48mm
Fits: JVP-400/750
KH410/750
KHF14/20
Other part #'s: 04A30159010
Manufactured in the USA.

Pre-Filters

The JVP line of pumps benefit from a regular replacement of their filters. On a general note, the filter should be changed at least every 6 months, however, it could be sooner depending the environmental conditions of your industry.

While blowing out the filters on a regular basis is an excellent idea, and will help keep your pump filters clean, the high pressure air can cause deformation, cuts, and breaks in the filter paper. Also, blowing the filters out will also cause the particles to actually embed themselves in the porosity of the filter paper, further clogging them, and causing your pump to run harder. The cleaner the filter, and the passage of air through it, will allow the pump to breathe, run cooler, and give longer life to the pump.

Replacement Prefilters.

No. Description Materials Qty.
1 Upper filter cover. Aluminum 1
2 Lower filter cover. Aluminum 1
3 Filter body Acrylic 1
4 Knob (open/close) Plastic 1
5 Filter Element Paper or S-Stl 1
6 Bolt Steel 1
7 Nut Steel 1
8 Gasket Cork 2
9 Nut, Cap Steel 1
10 Washer Steel 1
11 Plug, Auto drain Rubber 1
Models Size Pumps/Line to fit.
IF 100-20 G 3/4" Clear View + AL 3/4"
IF 100-25 G 1" Clear View + AL 1"
IF 150-32 G 1-1/4‘‘ Clear View + AL 1-1/4"
IF 200-50 G 2" Clear View + AL 2"